3036042

Phoenix Contact ST 2.5-3L Three-layer multi-layer terminal block (grey, spring clip type)

ST 2,5-3L is a three-layer multi-layer terminal block with a spring clip quick-connect design. It is rated at 500V/20A and has a conductor range of 0.08 to 4 square millimeters. It can be installed on NS35/7.5 or NS35/15 DIN rails and is suitable for control box wiring applications that require simultaneous connection of multiple circuits.

Share To

Phoenix Contact ST 2.5-3L Three-layer multi-layer terminal block (grey, spring clip type)

Product Positioning

ST 2,5-3L is a three-layer multi-layer terminal block from the Phoenix Contact CLIPLINE series. It can integrate three independent circuits with spring clip connections in the same terminal block, which can save a lot of installation space in the distribution box.

Core Product Advantages and Features

Three independent loops

A single terminal block integrates three layers of spring clamps, allowing simultaneous connection to three different circuits, saving DIN rail mounting space.

Spring clip quick connector

It adopts a spring-loaded contact design, which can complete the wiring without screws and has the characteristics of being resistant to vibration and loosening.

Wide conductor compatibility range

It can accept wires from 0.08 to 4 square millimeters, with a rated current of 20A, meeting the wiring requirements of most control circuits.

Standard DIN rail mounting

Compatible with NS35/7.5 and NS35/15 standard rails, facilitating mixed arrangement with other CLIPLINE terminals.

project	Specification
model	ST 2.5-3L
Rated voltage	500 V
Rated current	20 A
conductor cross-sectional area	0.08–4 mm²
Connection method	Spring-cage type
number of floors	3 floors
color	grey
Installation rails	NS 35/7.5, NS 35/15

Recommend

Phoenix Contact ST 16-PE Spring-type Grounding Terminal

3036165

Phoenix Contact ST 16-PE spring-loaded grounding terminal, using spring cage connection, conductor cross-sectional area range 0.2-25mm² (rated 16mm²), yellow-green identification, 2 sets of connection points, conforms to DIN EN/IEC 60947-7-2 protective grounding terminal standard, and is installed on NS35 rail.

Phoenix Contact FBS-GY Gray Plug-in Bridge Connector, 8.2mm Pin Pitch

Plug-in bridging connector FBS pin pitch: 8.2mm - gray (2P~10P)

The FBS-GY pluggable bridging connector is designed for 8.2mm pitch CLIPLINE terminals. Its gray housing makes it easy to distinguish from standard terminals. It is available in various pole numbers from 2P to 10P. It can be plugged in and connected to multiple terminal blocks without tools, making it suitable for control box wiring applications that require quick establishment of common potential circuits.

Phoenix Contact ST 2.5-QUATTRO Four-Wire Straight-Through Terminal Block

3031306

ST 2,5-QUATTRO is a four-hole integrated straight-through terminal block with a spring clip connection design. It is rated at 800V/24A and supports conductors from 0.08 to 4 square millimeters. It can connect four conductors in parallel within a single terminal block and is suitable for control box wiring that requires multiple conductors to be connected at the same potential.