PxC Phoenix

Phoenix Contact NS 35/15 DIN rail with holes is made of galvanized steel sheet with a thick passivation coating. It has a silver appearance, a length of 2000mm, and the hole design facilitates wiring fixation and cable management. It conforms to approximately EN 60715 rail specifications and is suitable for installation inside various distribution boxes and control panels.

Phoenix Contact PTFIX 6X10/S-NS35A gray wiring distribution board, rated voltage 800V, rated current 57A, conductor cross-sectional area 0.5-16mm², adopts push-in wiring, can be directly installed on NS35 rails or fixed with screws, suitable for power distribution wiring.

Phoenix Contact PTC 4-HESILED 24 (5X20) fuse terminal block, suitable for 5x20mm glass/ceramic fuses, rated 24V, 6.3A, with built-in LED optical indicator to show the fuse status in real time, push-in wiring, mounted on NS35 rail.

Phoenix Contact PTRVB 4-PV/BK potential distribution terminals feature connection points from level 1 to level 4, a rated voltage of 250V, a rated current of 17.5A, and a conductor cross-sectional area of 0.14-2.5mm². They employ push-in wiring, making them suitable for rapid potential distribution in confined spaces.

Phoenix Contact PTPOWER 35-PE grounding terminal uses PowerTurn rotary wiring technology. The conductor cross-sectional area ranges from 2.5-35mm² (rated 35mm²). It has two sets of connection points, yellow-green identification, and is installed on NS35/15 DIN rails. It is suitable for large cross-sectional area protective grounding wiring.

Phoenix Contact PT 2,5-TG disconnect terminal block, rated voltage 400V, rated current 20A, conductor cross-sectional area 0.14-4mm² (rated 2.5mm²), adopts push-in wiring, can be plugged in and unplugged with a special plug for circuit disconnection or measurement, and is installed on NS35 DIN rail.

Phoenix Contact PT 2.5-QUATTRO RD straight-through terminal block, red body with 4 sets of connection holes, rated voltage 800V, rated current 24A, conductor cross-sectional area 0.14-4mm² (rated 2.5mm²), push-in wiring for easy circuit color identification and management.

Phoenix Contact D-PT 16-TWIN N-terminal board, gray in appearance, 2.2mm wide and 100.2mm high, is used to cover the exposed open contact side of PT 16-TWIN series terminal blocks, protecting wiring and improving terminal block neatness.

Phoenix Contact FBS pluggable bridging connectors, with a 5.2mm pin pitch and blue body, are available in 2P to 10P pin configurations. They can be directly inserted into the slot on the top of the terminal block to achieve the same potential bridging and are suitable for use with 5.2mm pin pitch terminal blocks.

Phoenix Contact ST 16-PE spring-loaded grounding terminal, using spring cage connection, conductor cross-sectional area range 0.2-25mm² (rated 16mm²), yellow-green identification, 2 sets of connection points, conforms to DIN EN/IEC 60947-7-2 protective grounding terminal standard, and is installed on NS35 rail.

ST 2,5-3L is a three-layer multi-layer terminal block with a spring clip quick-connect design. It is rated at 500V/20A and has a conductor range of 0.08 to 4 square millimeters. It can be installed on NS35/7.5 or NS35/15 DIN rails and is suitable for control box wiring applications that require simultaneous connection of multiple circuits.

The FBS-GY pluggable bridging connector is designed for 8.2mm pitch CLIPLINE terminals. Its gray housing makes it easy to distinguish from standard terminals. It is available in various pole numbers from 2P to 10P. It can be plugged in and connected to multiple terminal blocks without tools, making it suitable for control box wiring applications that require quick establishment of common potential circuits.

ST 2,5-QUATTRO is a four-hole integrated straight-through terminal block with a spring clip connection design. It is rated at 800V/24A and supports conductors from 0.08 to 4 square millimeters. It can connect four conductors in parallel within a single terminal block and is suitable for control box wiring that requires multiple conductors to be connected at the same potential.

The standard FBS pluggable bridging connector has a pin pitch of 8.2mm and comes in red. It is a different color version from the separately sold FBS-GY gray version, which belongs to the same series. It offers a choice of 2P to 10P pins and allows for tool-free connection of the terminal blocks, making it suitable for general circuit bridging wiring.

USLKG 1,5 N is a protective grounding terminal marked in green and yellow. It uses a screw connection method and is suitable for conductors from 0.14 to 1.5 square millimeters. It has a PE grounding foot on the bottom and is fixed to the rail with an M2 screw. It is compatible with NS35/7.5, NS35/15 and NS32 mounting rails.