PxC Phoenix

The PT 2.5-3PV BU is a blue-cased, three-layer multi-layer terminal block that uses tool-free plug-in wiring technology. It is rated at 500V/20A, can connect wires from 0.14 to 4 square millimeters, and has cross-layer bridging capabilities. It is suitable for equipotential bonding applications where circuits need to be distinguished by color.

The NS 35/7,5 PERF is a perforated DIN rail made of galvanized passivated steel, with a single rail length of 2000mm. It conforms to the EN 60715 international standard specification. The rail body has through holes along its length to facilitate the installation of various terminals and modular components with CLIPLINE accessories such as mounting brackets and end caps.

PTFIX tap block terminal blocks are one-piece molded tap block terminal blocks that eliminate the need for manual bridging. They adopt direct-insertion wiring technology and offer wire specifications of 1.5, 2.5, 4, and 10 square millimeters, as well as 4, 6, 12, and 18 sets of contacts. They are also available in various colors for easy identification and are suitable for power tapping and wiring in space-constrained situations.

The UT 4-HESILA 250 is a protective terminal block that can be fitted with 5x20mm fuses. It has a rated voltage of 250V and a rated current of 6.3A. It uses a screw connection and has a built-in optical indicator light that can display the fuse status in real time. It also supports cross-layer bridging to save wiring space.

AKG 16 GNYE is a high-current terminal block with green and yellow markings. It has a rated voltage of 300V and a rated current of 76A. It can hold conductors from 1.5 to 16 square millimeters and uses a screw connection. It is commonly used in high-current power distribution applications such as forming neutral busbars or protective grounding busbars.

The AKG 4 GNYE mounting grounding terminal block features a green and yellow color scheme that conforms to grounding marking standards. It is rated at 300V/41A, supports conductors from 0.5 to 6 square millimeters, and uses screw-type connections. It is suitable for integrated configuration of grounding circuits in distribution panels.

The PP-H 2,5/1-M is a single-circuit pluggable terminal block with a push-in connection for tool-free wiring. It is rated at 500V/24A and supports wires ranging from 0.14 to 4 square millimeters. It features a gray housing and is suitable for control box applications requiring frequent plugging and unplugging for maintenance.

The FBSR pluggable bridging connector has a pin pitch of 5.2mm and is available in multiple positions from 2P to 10P. It has a rated current of 17.5A, and the red body is made of copper and insulated from the PA. It facilitates quick parallel connection between terminal blocks in the same row and simplifies the wiring process.

KLM terminal block label carriers can insert 25x6mm label cards and are installed with E/UK or CLIPFIX 35 terminal fasteners. They are suitable for marking and managing a large number of terminal block circuits and improving the efficiency of field wiring identification.

USST 4 spring-assisted screw-type terminal block, rated 1000V/32A, wire range 0.2-6 square millimeters, screw-locked with spring support to prevent loosening, suitable for NS35/NS32 rails, gray single-layer double-hole design.

The USA 10 DIN rail adapter measures 42.6x10x7.4mm and features M3 self-tapping screw snap-on mounting. It is compatible with various standard DIN rails, including NS32, NS35/7.5, and NS35/15. It has a gray insulated housing and is used to secure electrical components such as switches within a control panel.

The E/UK terminal fastener uses a gray PA material shell, is compatible with NS35/7.5 and NS35/15 guide rails, has a locking torque of 0.6-0.8Nm, is installed at both ends of the terminal block to prevent slippage and loosening, and has a large marking area for easy panel identification and management.

CLIPFIX 35-5 quick-release terminal fasteners can be installed tool-free on both ends of NS35/7.5 and NS35/15 rails. They are approximately 5.15mm wide, have a bridging component storage function, a gray housing, and provide a large marking area.

The P-FU 5X20 LED 24-5 fuse plug is compatible with 5x20mm G-type fuses and features a 24V LED fault indicator. Test points are located on both sides for easy measurement. The black casing allows for plug-in installation and is suitable for overload and short-circuit protection circuits.

The HDFK 4 through-wall terminal is designed for panel-mounted installations. It features a snap-fit structure that automatically compensates for panel thickness, combined with screw tension sleeve wiring technology. It has a rated current of 32A, is suitable for conductors from 0.2 to 6mm², and offers low contact temperature rise and excellent versatility.