3209248

Phoenix Contact P-FU 5X20 LED 24-5 LED Display Fuse Plug

The P-FU 5X20 LED 24-5 fuse plug is compatible with 5x20mm G-type fuses and features a 24V LED fault indicator. Test points are located on both sides for easy measurement. The black casing allows for plug-in installation and is suitable for overload and short-circuit protection circuits.

Share To

Phoenix Contact P-FU 5X20 LED 24-5 LED Display Fuse Plug

Product Positioning

The P-FU 5X20 LED 24-5 is a Phoenix Contact fuse plug with LED indicator function. When the fuse blows, the LED will light up to indicate the location of the faulty circuit, making it easy for maintenance personnel to quickly determine the location of the fault.

Core Product Advantages and Features

LED fault display

When the fuse blows, the LED indicator light illuminates, allowing you to determine if the circuit is abnormal without disassembling it, thus shortening troubleshooting time.

Test point design on both sides

Test contacts are provided on both sides of the plug, allowing direct measurement with a multimeter without removing the fuse.

Standard 5x20mm fuse

Compatible with commercially available 5x20mm G-type fuses, replacement parts are readily available, and maintenance costs are low.

Plug-in tool-free replacement

With plug-in installation, tools are not required when replacing fuses, making on-site maintenance work faster.

project	Specification
model	P-FU 5X20 LED 24-5
Applicable fuse specifications	5 x 20 mm (Type G)
LED indicates voltage	24 V
color	black
Installation method	Plug-in

Recommend

Phoenix Contact CLIPFIX 35-5 Quick-release Terminal Fixture

3022276

CLIPFIX 35-5 quick-release terminal fasteners can be installed tool-free on both ends of NS35/7.5 and NS35/15 rails. They are approximately 5.15mm wide, have a bridging component storage function, a gray housing, and provide a large marking area.

Phoenix Contact HDFK 4 Through-Wall Terminal Block - Panel Pass-Through Terminal Block

0707086

The HDFK 4 through-wall terminal is designed for panel-mounted installations. It features a snap-fit structure that automatically compensates for panel thickness, combined with screw tension sleeve wiring technology. It has a rated current of 32A, is suitable for conductors from 0.2 to 6mm², and offers low contact temperature rise and excellent versatility.

Phoenix Contact PTI 2.5-L/TG Terminal Block for Building Installation

3213961

The PTI 2,5-L/TG is a terminal block for building power distribution installation. It adopts push-in wiring technology and can connect wires from 0.14 to 4 mm². It has a rated voltage of 400V and a rated current of 24A. The upper layer has a knife-type isolation zone to meet the individual isolation testing requirements of the circuit. It can be installed on NS 35 rails.