0707086

Phoenix Contact HDFK 4 Through-Wall Terminal Block - Panel Pass-Through Terminal Block

The HDFK 4 through-wall terminal is designed for panel-mounted installations. It features a snap-fit structure that automatically compensates for panel thickness, combined with screw tension sleeve wiring technology. It has a rated current of 32A, is suitable for conductors from 0.2 to 6mm², and offers low contact temperature rise and excellent versatility.

Share To

Phoenix Contact HDFK 4 Through-Wall Terminal Block - Panel Pass-Through Terminal Block

Product Positioning

HDFK 4 is a terminal block designed by Phoenix Contact specifically for through-panel wiring in equipment. Its snap-fit design simplifies the installation process and ensures good contact quality.

Core Product Advantages and Features

Tool-free snap-fit installation

It adopts a tool-free snap-fit principle and can be directly installed on the device panel, greatly reducing installation time.

Automatic panel thickness compensation

The structure can automatically adapt to different panel thicknesses, improving installation versatility and compatibility.

Screw tension sleeve wiring

It provides a stable and widely known connection method based on the tension sleeve screw wiring principle.

Low temperature rise design

Maximize contact force to reduce contact temperature rise and improve long-term operational stability.

project	Specification
Type	HDFK 4
Rated current	32 A
Available wire diameter	0.2 – 6 mm²
Connection method	Screw tension sleeve type
width	8.1 mm
color	grey

Recommend

Phoenix Contact P-FU 5X20 LED 24-5 LED Display Fuse Plug

3209248

The P-FU 5X20 LED 24-5 fuse plug is compatible with 5x20mm G-type fuses and features a 24V LED fault indicator. Test points are located on both sides for easy measurement. The black casing allows for plug-in installation and is suitable for overload and short-circuit protection circuits.

Phoenix Contact PTI 2.5-L/TG Terminal Block for Building Installation

3213961

The PTI 2,5-L/TG is a terminal block for building power distribution installation. It adopts push-in wiring technology and can connect wires from 0.14 to 4 mm². It has a rated voltage of 400V and a rated current of 24A. The upper layer has a knife-type isolation zone to meet the individual isolation testing requirements of the circuit. It can be installed on NS 35 rails.

Phoenix Contact PTFIX 6/6X2,5-NS35A GY Horizontal Distribution Terminal Block

3273198

The PTFIX 6/6X2,5-NS35A GY is a horizontally configured power distribution terminal block. It can accept 0.14 to 4 mm² wires on the load side and 0.5 to 10 mm² wires on the feeder side. Both use push-in wiring. The rated voltage is 690V. It has 7 contacts and is gray (RAL 7042). It is suitable for NS 35 rail mounting.