3RA2815-1FW10

The 3RA2815-1FW10 is a solid-state delay auxiliary switch that provides power-off delay without requiring an external control voltage. It features 1NC and 1NO contacts, a screw-type terminal design, dimensions of 38x45x74mm, IP20 protection rating, and is suitable for front-mounted mounting on SIRIUS 3RT2 S00 to S3 contactors and 3RH2 contactor relays.

Share To
Product Positioning

The 3RA2815-1FW10 is the screw terminal version of the Siemens SIRIUS 3RA28 series solid-state delay auxiliary switch. It has the same function as the 3RA2815-2FW10, which is power-off delay and does not require an external control voltage. It is suitable for control panel designs that prefer traditional screw-locked wiring.

Core Product Advantages and Features
Power-off delay does not require voltage control
While delaying the output contact action, there is no need to configure an additional control power supply circuit.
Screw terminals
The wiring adopts the traditional screw locking method, which is suitable for the construction habits of those who are accustomed to using screw terminals.
1NC plus 1NO dual contact
It provides two sets of outputs, normally closed and normally open, which can be flexibly selected according to the control logic.
IP20 protection rating
It has basic dust protection and is suitable for installation in general control panel environments.
project Specification
Model (MLFB) 3RA2815-1FW10
Product Type Solid-state delay auxiliary switch
Delay function Power outage delay (no external control voltage required)
Contact configuration One normally closed group + one normally open group (1 NC + 1 NO)
Terminal type Screw terminals
Control power supply voltage 24…240V AC/DC, 50/60Hz
Delay setting range 0.05…100 seconds
Rated current of contacts AC-15 maximum 3A (24V/250V)
Applicable contactors SIRIUS 3RT2 (S00, S0, S2, S3), 3RH2 S00 contactor relay
External dimensions Approximately 38×45×74mm
Protection level IP20
Mechanical life Approximately 10 million switches