3RV2011-0EA16

The 3RV2011-0EA16 is a Siemens SIRIUS S00 frame motor protection circuit breaker with a current adjustment range of 0.28~0.4 A, an instantaneous short-circuit trip value of 5.2 A, a rated voltage of 690V AC, a maximum breaking capacity of 100kA, and adopts CLASS 10 thermal overload tripping characteristics. It is suitable for overload and short-circuit protection of the main circuit of three-phase motors.

Share To

Siemens SIRIUS 3RV2011-0EA16 S00 Motor Protection Circuit Breaker Product Appearance Drawing

Product Positioning

The 3RV2011-0EA16 is a Siemens SIRIUS series S00 frame motor protection circuit breaker with a current adjustment range of 0.28~0.4 A. It is suitable as an overload and short circuit protection device for the main circuit of a three-phase motor.

Core Product Advantages and Features

Precise overload current adjustment

The current adjustment range is 0.28~0.4 A, and the set value can be finely adjusted according to the actual rated current of the motor, providing thermal overload protection for the appropriate load.

High short-circuit breaking capacity

With a short-circuit breaking capacity of up to 100kA (240/400/500V AC), it can reliably disconnect the circuit even in the event of a severe short-circuit fault.

S00 Miniaturized Frame Design

Adopting the SIRIUS S00 standard frame, it has a compact size and can be installed on a 35mm DIN rail for wiring, saving control panel space.

Terminal and auxiliary contact configuration

This is a specific terminal version within the 0.35~0.5A (Group F) current adjustment range, and its main protection characteristics are consistent with other models in the same group.

project	Specification
model	3RV2011-0EA16
Product Type	SIRIUS motor protection circuit breaker (motor starting protector)
Frame size	S00
Current adjustment range	0.28~0.4 A
Instantaneous short circuit trip value	5.2 A
Break away from level	CLASS 10
Rated operating voltage	690V AC (Operating range 20~690V AC, 50/60Hz)
Extreme number	3-pole (three-phase main circuit)
Short circuit breaking capacity	Maximum 100kA (240/400/500V AC)
Protection level	IP20 (Front Panel and Terminals)
Installation method	Screw-fixed or snap-fit mounted on a 35mm DIN rail (DIN EN 60715)
Operating temperature range	-20°C ~ +60°C
Applicable Standards	IEC 60529, DIN EN 60715

Recommend

3RT2023-1BB44-3MA0

The Siemens 3RT2023-1BB44-3MA0 is based on a standard DC24V contactor and is equipped with 2NO+2NC non-removable auxiliary contacts manufactured in accordance with SUVA safety specifications, making it suitable for safety interlocking circuits.

3RT2023-1FB40

The Siemens 3RT2023-1FB40 uses a DC24V coil and is equipped with plug-in diode suppression, threaded terminals, and 1NO+1NC auxiliary contacts, making it suitable for applications near sensitive electronic circuits.