3RW4435-2BC35

The SIRIUS 3RW44 series soft starter has a rated current of 117 amps, supports 75 horsepower standard start and 100 horsepower internal delta connection, and has a control voltage of approximately 115 volts. The spring-loaded terminal design speeds up panel wiring efficiency and is suitable for smooth start-stop applications of small and medium power motors.

Share To
Product Positioning

The 3RW4435-2BC35 is a small soft starter from the Siemens SIRIUS 3RW44 series. By controlling the thyristor conduction angle, it gradually increases the motor terminal voltage, reducing the inrush current and mechanical shock at the moment of startup. It is suitable for smooth start-stop control of small and medium power three-phase motors such as conveyors and pumps.

Core Product Advantages and Features
Spring-type terminal wiring
The main circuit adopts a spring-type terminal design, which allows for quick crimping of wires without tools, shortening panel assembly and maintenance time.
Dual-circuit current output
It offers two output modes: a standard connection of 117 amps and an internal delta connection of approximately 100 horsepower, allowing for flexible selection based on the motor's wiring method.
Built-in bypass connection
After startup, it automatically switches to bypass operation to reduce the continuous heating of the thyristor and extend the service life of the component.
Electronic motor protection
Built-in overload and phase loss detection, it trips immediately in case of abnormality to protect the safety of downstream motors and transmission mechanisms.
project Specification
model 3RW4435-2BC35
Product Type SIRIUS 3RW44 Miniature Soft Starter
Standard circuit rated current 117 A
Standard circuit power 75 HP
Internal delta connection power 100 HP
Main circuit rated voltage range 200~460 V AC
Control power supply voltage Approximately 115–120 V AC, 50/60 Hz
Terminal type Spring-loaded (screwless) terminals
Enclosure protection rating IP00, IP20 can be achieved by adding a terminal cover.
External dimensions (width × height × depth) 170×200×270 mm
Installation method Screws that can rotate vertically ±90 degrees for fixing
Applicable to The three-phase asynchronous motor starts and stops smoothly.