3RW4900-0KC00

The 3RW4900-0KC00 is a PROFIBUS communication module compatible with the Siemens SIRIUS 3RW44 soft starter. It supports DPV1 slave communication and requires firmware version E06 or higher for installation. It is easy to integrate into a PROFIBUS field bus system.

Share To

Siemens 3RW4900-0KC00 SIRIUS 3RW44 PROFIBUS Communication Module

Product Positioning

The 3RW4900-0KC00 is the PROFIBUS communication module for the Siemens SIRIUS 3RW44 soft starter. It supports DPV1 slave functionality and can integrate the soft starter into the PROFIBUS field bus network.

Core Product Advantages and Features

Supports DPV1 slave functionality

Models with firmware version E04 and above can operate in DPV1 communication mode under the Y-Link architecture.

PROFIBUS Network Integration

Integrate soft starter parameters and status information into the PROFIBUS field bus system.

Firmware compatibility requirements

It requires a 3RW44 model with firmware version E06 or higher. Please confirm the version before installation.

Original factory discontinued spare parts

This is a genuine Siemens communication module, suitable for maintenance or upgrades of existing PROFIBUS production lines.

project	Specification
Applicable models	SIRIUS 3RW44 Soft Starter
Product Type	PROFIBUS communication module
Communication Protocol	PROFIBUS DPV1 Slave Function
Firmware requirements	Requires firmware version 3RW44 or higher (models shipped after May 2006).
External dimensions	117.3 x 36.6 x 88.6 mm
net weight	Approximately 0.158 kg
Protection level	IP20
Product Status	The original manufacturer has ceased production (since October 2022).
Applicable series	SIRIUS 3RW44 Large Frame Soft Starter

Recommend

3RW4900-0NC00

The 3RW4900-0NC00 is a PROFINET communication module compatible with the Siemens SIRIUS 3RW44 soft starter. It requires a 3RW44 firmware version 12 or higher for installation and can integrate soft starter information into the PROFINET industrial Ethernet architecture.

3RW4900-0AC00

The 3RW4900-0AC00 is an external display and operation module for the SIRIUS 3RW44 soft starter. It can be embedded in the control panel door, allowing personnel to easily read operating information and set start parameters from outside the panel, improving maintenance and inspection efficiency. It is suitable for models with firmware E05 and above.

3RW4766-2HC00

The 3RW4766-2HC00 is a spare set of spring-loaded terminal blocks for the control circuit of the SIRIUS 3RW44 soft starter. It consists of 4 terminal blocks and 24 contacts, and is suitable for replacing original screw-type terminals or repairing and updating control wiring. It allows for quick wiring without the need for a screwdriver.