Procurement Zone

The Siemens SIRIUS AS-Interface power supply has an input voltage of 120V or 230V AC and an output of 30V DC/5A. It has an IP20 protection rating and features ground fault detection, overload detection, and AS-i data decoupling functions, ensuring stable and reliable operation.

The Siemens SIRIUS AS-Interface power supply has an input voltage of 24V DC, an output of 30V DC/3A, an IP20 protection rating, and features ground fault detection, overload detection, and AS-i data decoupling functions. It is suitable for AS-i network systems powered by DC.

The SIRIUS 3RX9501-0BA00 is a dedicated power supply unit for the AS-i system. It has an input voltage of 85-253V AC, a stable output of 30V DC, and a rated current of 3A. It provides stable power supply to the AS-Interface bus network, is rail-mounted, has an IP20 protection rating, and is suitable for industrial automation control panels.

The SIRIUS 3RX9025-0AA00 is a special-shaped cable for external auxiliary power supply of AS-i systems. It is made of black trapezoidal cross-section 2x1.5mm² polyurethane (PU) material, which is oil-resistant, weather-resistant, and bend-resistant. It comes in a standard 100-meter roll and is suitable for wiring of sensor/actuator circuits that require additional power supply.

The SIRIUS 3RX9020-0AA00 is a special-shaped cable for external auxiliary power supply of AS-i systems. It is made of black trapezoidal cross-section 2x1.5mm² rubber material and is suitable for wiring of sensor/actuator circuits that require additional power supply. It comes in a standard 100-meter roll and is manufactured in Germany.

SIRIUS 3RX9010-0AA00 is a standard yellow trapezoidal cross-section cable for AS-i systems, made of 2x1.5mm² rubber. It transmits both data signals and power, and is the main trunk cable for building AS-Interface bus networks. It comes in a standard 100-meter roll.

The Siemens QBM2030 series differential pressure sensor features a DC 0-10V analog output, AC 24V or DC 13.5-33V power supply, a total error of less than ±3%FS, IP42 protection rating, and an operating temperature of 0~70°C. It comes with a plastic pressure connector and a 2-meter duct probe, making it suitable for HVAC duct differential pressure and airflow detection, as well as filter and fan monitoring applications.

The SICAM P35 is a three-phase multi-functional power monitoring meter that can measure three-phase voltage, current, effective/ineffective power, power factor, and frequency. It has an effective power accuracy of 0.5S, a wide-viewing-angle LCD display, and supports RS-485 Modbus-RTU communication. It is suitable for medium and low voltage power distribution and energy management systems.

The SENTRON PAC1020 is a basic multi-functional power monitoring device from Siemens. It can measure voltage, current, active power, inactive power, and frequency with accuracy conforming to IEC 62053-21 standards. It is equipped with a white LCD display, supports RS-485 Modbus-RTU communication, and features a 96x96mm panel mounting design.

The SIRIUS 3SF1324-1SG21-1BA4 is an electromagnetic locking safety interlock switch with a locking force of 1300N. It can withstand entry from 5 directions, integrates ASIsafe communication, has 2NC action contacts with 2 take-up and 2 evaluation, and 1NC locking contact with spring locking. It also has two emergency release devices at the front and rear, making it suitable for safety door interlocking control.

The SIRIUS 3SF1324-1SD21-1BA4 is a spring-locking safety interlock switch with a locking force of 1300N, capable of withstanding entry from 5 directions. It has a body width of 54mm and integrates ASIsafe communication. The operating contacts have 2NC sampling and 2 evaluation, and the protection rating reaches IP66/IP67. It is suitable for safety door interlocking in outdoor or dusty environments.

The SIRIUS 3SF1324-1SB21-1BA1 is an energized locking safety interlock switch with a locking force of 1300N and can withstand entry from 5 directions. It has a single 1NC actuating contact and an electromagnetic locking contact of 1NC. It integrates ASIsafe communication and must be used with a separate 3SE5000-0AV0 detachable operating head.

The SIRIUS 3SF1234-1QV40-1BA1 is a separate operating head safety interlock switch without an electromagnetic locking mechanism. It can withstand entry from five directions, conforms to EN 50047, integrates ASIsafe communication and reports AS-i status, and has 2NC operating contacts with an M12 four-pin connector, suitable for general safety door position detection.

The 3SE7950-1AD is a cable adjustment clip accessory for the Siemens SIRIUS 3SE7 pull-cord safety switch system. It is an M6x100 size cable made of zinc alloy die-casting combined with steel and is installed at the end of the cable for fine-tuning of tension.

The 3SE7950-1AB is a cable adjustment buckle accessory for the Siemens SIRIUS 3SE7 pull-cord safety switch system. It is an M6x60 size cable adjustment buckle made of zinc alloy die-casting combined with steel, and is suitable for tension adjustment of short cable sections.