Procurement Zone

The PLC-RPT-24DC/21 is a relay module in the PLC-INTERFACE series. It contains a push-in terminal block and a plug-in mini relay. The coil voltage is 24V DC. It has one set of changeover contacts and an input suppression circuit, making it suitable for signal amplification and isolation control.

The REL-MR-24DC/21 is a plug-in mini power relay with a coil voltage of 24V DC, one set of switching contacts (SPDT) with a maximum switching current of 6A, and RT III wash protection rating. It is suitable for signal coupling or small load switching.

The RIF-0-RPT-24DC/21 is a Phoenix Contact pre-assembled relay module with a 24V DC coil voltage, one set of switching contacts (SPDT), a maximum load of 6A/250V AC/DC, and push-in wiring. It is suitable for mounting on NS35 DIN rails and is used for signal isolation in industrial control circuits.

The UPS-BAT/PB/24DC/12AH is a battery module that is paired with the QUINT UPS-IQ uninterruptible power supply system. It has a built-in VRLA-AGM lead-acid battery with a rated voltage of 24V DC and a capacity of 12Ah. It features automatic detection and communication functions, and can report battery status and remaining capacity. It is suitable for backup power supply of industrial control systems.

The UPS-BAT/PB/24DC/4AH is a battery module that comes with the QUINT UPS-IQ uninterruptible power supply system. It has a built-in VRLA-AGM lead-acid battery with a rated voltage of 24V DC and a capacity of 4Ah. It features automatic detection and communication functions, can report battery status, and is suitable for short-term backup power supply for small loads.

UNO POWER is Phoenix Contact's economical and practical series of single-phase power supplies, with output power ranging from 25W to 960W and output voltage from 5 to 48V DC. With a minimum housing width of only 21mm, it features high efficiency and low standby power loss, making it suitable for powering fixed loads in space-constrained control panels and for basic power supply needs in industrial automation.

The QUINT-ORING/24DC/2X20/1X40 is an active power redundancy module with a protective coating. It can be connected in parallel with two 24V DC/20A power supplies to provide a total output of 1x40A. It features built-in ACB current balancing technology and continuous redundancy monitoring, and includes an OK relay fault signal output.

The ESSENTIAL POWER is Phoenix Contact's entry-level, economical power supply series. It outputs 24V DC, features a wide input voltage range, fanless convection cooling design, and is certified to safety standards such as UL61010 and CE. It also offers a lifetime warranty and is suitable for basic commercial applications such as building automation and vending machines.

TRIO POWER is Phoenix Contact's standard-feature-level power supply series. Its compact size allows for close side-by-side installation, and it features a 150%/5-second dynamic start-up capability to handle difficult-to-start loads. It uses push-in terminals for quick wiring and provides multi-color LED diagnostics, making it suitable for powering mechanical equipment and control panels.

The QUINT POWER is Phoenix Contact's highest-end and most feature-complete power supply series. It supports NFC or software remote configuration settings, features analog output for real-time monitoring of current, voltage, and power, and provides operation time recording and warning functions. It complies with the IEC 61850-3 standard and is suitable for critical applications with extremely high reliability requirements.

The NBC-R4AC/5,0-93B/R4AC is a Phoenix Contact pre-assembled plug-in cable with IP20-rated RJ45 straight connectors at both ends. It is 5 meters long, supports CAT5 standard transmission up to 1Gbps, has 360° full shielding, green PVC coating, and is suitable for automation network connections such as PROFINET.

The NBC-R4AC/10G-R4AC/10G-94F/10,0 is a Phoenix Contact pre-assembled high-speed plug-in cable with IP20-rated RJ45 connectors at both ends. It is 10 meters long, supports CAT6A standard 10Gbps transmission, and features 360° full shielding. The PUR coating is weather-resistant and abrasion-resistant, making it suitable for high-speed industrial networks.

The FL SWITCH slim unmanaged switch is part of Phoenix Contact's industrial Ethernet switch series. It is plug-and-play without configuration, supports PROFINET and other protocols for priority traffic handling, and the 1100 series also supports EtherNet/IP. It features a slim, flat-mount DIN rail design, making it suitable for shallow control panels, and has IP30 protection.

Phoenix Contact thermal-magnetic circuit breaker, model 0916603 (UT 6-TMC M 0,5A), rated current 0.5A, 1-position DIN rail mounting, compact and space-saving with a width of only 12.3mm, manual reset function, UL, VDE, CSA certified.

Phoenix Contact thermal circuit breaker, model 0712194 (TCP 1A), rated current 1A, voltage 250V AC/72V DC, with flat plug-in contacts, can be used with UK 6-FSI/C or ST 4-FSI/C fuse terminal blocks, and can be quickly reset after tripping.