Procurement Zone

S00 frame electromagnetic contactor, DC 24V coil with built-in suppression diode to absorb power failure surges and protect PLC output points, spring terminals with 1NO auxiliary contacts, AC-3 rated 7A/3kW@400V.

The SIRIUS S00 miniature contactor features an operating coil of the less common DC 220V specification, spring terminals, and a built-in 1NO auxiliary contact, making it suitable for direct use on existing 220V DC control circuit panels.

The SIRIUS S00 series contactor has an operating coil of DC 110V and a spring terminal with a 1NC normally closed auxiliary contact, making it suitable for power distribution or interlocking circuits that use 110V DC as the control power supply.

The S00 contactor, which shares the same DC 110V coil as the 2BF42, has a built-in 1NO normally open auxiliary contact and spring terminal wiring corresponding to the last digit of the order code 41, making it suitable for use in 110V DC control circuits.

The SIRIUS S00 series is the most popular DC 24V coil contactor, featuring spring terminals and a built-in 1NO auxiliary contact. With a holding power of only 4W, it is suitable for motor control circuits directly driven by PLC 24V output.

SIRIUS S00 series AC 230V coil contactor, with spring terminals and 1NC normally closed auxiliary contacts, has a low-load switching reliability of up to 100 million cycles and a failure rate of less than 1, making it suitable for interlocking and alarm circuits.

The SIRIUS S00 series is the most popular AC 230V coil contactor, with spring terminals and 1NO auxiliary contacts, holding power of 27VA (50Hz)/24.3VA (60Hz), suitable for single-phase control power supply panels.

The SIRIUS S00 series AC 220V coil contactor features spring terminals with 1NO auxiliary contacts, weighs approximately 0.253 kg, and is suitable for direct use on common 220V single-phase control power supply panels in Taiwan.

The S00 contactor, which shares the same AC 220V coil as the 2AN21, has a built-in 1NC normally closed auxiliary contact and spring terminal wiring according to the last digit of the order code 22. It is suitable for interlocking protection circuits that will break upon failure.

SIRIUS S00 series AC 110V coil contactor, with spring terminals and 1NC normally closed auxiliary contacts, has a maximum of 750 operations per hour and is suitable for 110V control power supply equipment or retrofitting of US standard machines.

The 3RT2015-2AF01 is a Siemens SIRIUS S00 miniature power contactor. It is a 3-pole contactor with an AC110V coil. The spring-loaded terminals can be crimped without screws, allowing for quick wiring. The main contacts are rated AC-3 at 7A and 3kW/400V. It is equipped with one set of normally open auxiliary contacts and is suitable for starting small and medium-sized motors and control circuits within panels.

The 3RT2015-2AB01 is a Siemens SIRIUS S00 miniature 3-pole contactor. The coil is AC24V and 50/60Hz universal. The main circuit uses spring terminals, which can crimp and disconnect wires without tools. The main contacts are AC-3 rated at 7A and 3kW/400V. It also has one set of normally open auxiliary contacts, which is suitable for low-voltage control panel wiring.

The 3RT2015-1VB41 is a Siemens SIRIUS S00 miniature 3-pole contactor. It uses a DC24V coil with screw terminals, ensuring secure wiring and making it suitable for applications requiring frequent wire replacement. The main contacts are AC-3 rated at 7A, 3kW/400V, and it comes with one set of normally open auxiliary contacts. It is commonly used in control circuits where PLC outputs are directly driven.

The 3RT2015-1VB42 is a Siemens SIRIUS S00 miniature 3-pole contactor with a DC24V coil and screw terminals. The main contacts are AC-3 rated at 7A, 3kW/400V. The auxiliary contacts are a set of normally closed (NC) contacts, suitable for power failure protection, abnormal interlocking, or safety circuit designs requiring reverse logic.

The 3RT2015-1QB41 is a Siemens SIRIUS S00 miniature 3-pole contactor with a DC24V coil and screw terminal wiring. The main contacts are AC-3 rated at 7A, 3kW/400V. The operating temperature range is from -25 to 60 degrees Celsius, making it suitable for outdoor distribution boxes with large temperature differences. It also has one set of normally open auxiliary contacts.