Siemens

Kenxin Motors, a Siemens distributor, imports circuit breakers, electromagnetic contactors, and low-voltage power distribution equipment from Siemens, the German industrial giant founded in 1847. Kenxin Motors supplies 100% original Siemens certified switching control components to assist in building automated systems that comply with international safety regulations for smart manufacturing and energy management.

3RT2026-1AP04

The 3RT2026-1AP04 is a 230V AC 50Hz coil contactor with 4 auxiliary contacts (2NO+2NC). It has an AC-3 rated capacity of 25A/11kW/400V and a holding apparent power of 77VA. It is suitable for automated panels that require multiple sets of AC control signal feedback at the same time.

3RT2026-1AP00

The S00 standard frame three-pole contactor features a 230V AC coil, compatible with common European control voltages. It has 1 NO + 1 NC auxiliary contacts for direct connection to a PLC signal circuit, and its 25A/11kW load capacity is sufficient for general motor starting and stopping.

3RT2026-1AN24

The 220V AC 50/60Hz coil, equipped with 2NO+2NC auxiliary contacts, offers twice the number of signal points compared to the standard 1NO+1NC, making it suitable for control panel designs requiring star-delta switching, multi-segment interlocking, or simultaneous feedback of two independent signals.

3RT2026-1AN20

The 220V AC dual-frequency coil is a common control voltage in Southeast Asia and some Taiwanese factories. It features 1NO+1NC auxiliary contacts with IP20 protection and 690V insulation. The information has been cross-confirmed from the specification sheets of multiple distributors.

3RT2026-1AL20

The 230V AC dual-frequency coil is one of the most commonly used voltages in Taiwanese control panels. The 1NO+1NC auxiliary contacts and screw terminal design make field wiring and maintenance more intuitive and convenient.

3RT2026-1AK60

The same coil can operate at 110V at 50Hz and 120V at 60Hz, making it suitable for equipment destined for the US/North America or dual-power supply lines. It also has additional marine classification certifications from ABS, BV, and DNV.

3RT2026-1AH20

A 48V AC coil is a relatively low control voltage level, suitable for applications with strict requirements on the risk of coil inductance, or for situations where existing control circuits already use a 48V configuration.

3RT2026-1AG24

The 110V AC 50/60Hz coil, equipped with 2NO+2NC auxiliary contacts, provides twice the number of signal points compared to the standard model, making it suitable for distribution panels that require simultaneous feedback of multiple statuses or interlocking control.

3RT2026-1AG20

The 110V AC coil is a common voltage in single-phase control circuits in Taiwan. Equipped with 1NO+1NC auxiliary contacts and screw terminals, it weighs only about 0.416 kg, making it suitable for control boxes with limited space.

3RT2026-1AF00

A 110V AC 50Hz single-frequency coil, suitable for production lines with a fixed power frequency of 50Hz, with 1 NO + 1 NC auxiliary contacts to meet general start/stop feedback requirements.

3RT2026-1AD20

The 48V AC dual-frequency coil offers a lower control voltage option than the standard model, suitable for applications with existing control circuits designed for 48V or where a lower coil terminal voltage level is preferred.

3RT2026-1AD00

S00 frame 3-pole contactor, 42V AC coil, AC-3 11kW/400V/25A, built-in 1NO+1NC auxiliary contacts, screw terminals, can directly replace the old main contactor in the design.

3RT2026-1AC24

The AC-3 features a low-voltage 24V AC coil design, a 11kW/400V/25A main circuit, and a 2NO+2NC detachable auxiliary contact base for more interlocking points. It weighs approximately 0.465 kg.

3RT2026-1AC20

S00 frame standard contactor, 24V AC dual-frequency coil with built-in 1NO+1NC auxiliary contacts, AC-3 11kW/400V/25A, weighing approximately 0.41 kg, available in stock.

3RT2026-1AB00

The single-frequency 24V AC 50Hz coil contactor, AC-3 11kW/400V main circuit with built-in 1NO+1NC auxiliary contacts, is suitable for production line equipment with a single frequency power grid.