3212439

Phoenix Contact PTTB 1.5/S/2P Double Layer Terminal Block

The PTTB 1,5/S/2P is a double-layer, two-pole (2P) terminal block that uses push-in/plug-out wiring technology. It can accept wires from 0.14 to 1.5 mm², has a rated voltage of 500V and a rated current of 16A, and features a gray body with orange plug-in parts. It is suitable for NS 35 rail mounting and effectively saves wiring space.

Share To

Phoenix Contact PTTB 1.5/S/2P Double Layer Terminal Block

Product Positioning

PTTB 1,5/S/2P is a dual-layer, two-pole terminal block from Phoenix Contact, which uses a two-layer configuration to increase wiring density in a single rail position.

Core Product Advantages and Features

Double-layer bipolar structure

It adopts a two-layer design, with two poles on each layer, and can accommodate more loops with the same track length.

Push-in/plug-out wiring

It combines push-in and plug-in connection technologies, taking into account both quick wiring and ease of maintenance.

Save installation space

The double-layer stacked design helps to increase wiring density within a limited track space.

Standard rail installation

Compatible with NS 35/7.5 and NS 35/15 standard DIN rails.

project	Specification
Type	PTTB 1.5/S/2P
Rated voltage	500 V
Rated current	16 A
Available wire diameter	0.14 – 1.5 mm²
Connection method	Push-in/plug-out wiring
Installation rails	NS 35/7.5, NS 35/15

Recommend

Phoenix Contact PTI 2.5-PE/L/L Grounding Terminal Block for Building Installation

3213949

PTI 2,5-PE/L/L is designed for protective earthing (PE) circuits in building distribution boxes. It uses push-in wiring technology and can accept conductors from 0.14 to 4 mm². It has a rated voltage of 400V, a three-layer connection structure with a total of 5 contacts, a gray appearance, and is suitable for NS 35 rail mounting. It is used in conjunction with other terminals in the same series.

Phoenix Contact FBS pluggable bridging connector, pin pitch 10.2mm

Plug-in bridging connector FBS§ Pin pitch: 10.2mm (2P~10P)

FBS pluggable bridging connectors have a pin pitch of 10.2mm and are available in various pole sizes from 2P to 10P. They are suitable for 10.2mm pin pitch terminal blocks in a complete CLIPLINE system. A single bridging connector can bridge up to 50 terminals and has a rated current of up to 57A. Tool-free plugging and unplugging installation facilitates multi-circuit shared potential wiring.

Phoenix Contact PT 6 Through-hole Terminal Block

3211813

The PT 6 is a single-layer push-in terminal block that allows for tool-free wire connection. It can accept wires from 0.5 to 10 mm², has a rated voltage of 1000V and a rated current of 41A, a gray body, is suitable for NS 35 rail mounting, and can be used with CLIPLINE series bridging connectors and test accessories.