Plug-in bridging connector FBS§ Pin pitch: 10.2mm (2P~10P)

Phoenix Contact FBS pluggable bridging connector, pin pitch 10.2mm

FBS pluggable bridging connectors have a pin pitch of 10.2mm and are available in various pole sizes from 2P to 10P. They are suitable for 10.2mm pin pitch terminal blocks in a complete CLIPLINE system. A single bridging connector can bridge up to 50 terminals and has a rated current of up to 57A. Tool-free plugging and unplugging installation facilitates multi-circuit shared potential wiring.

Share To

Phoenix Contact FBS pluggable bridging connector, pin pitch 10.2mm

Product Positioning

The FBS series pluggable bridging connectors have a pin pitch of 10.2mm and are used for common potential bridging between terminal blocks in the CLIPLINE complete system, offering a selection of 2P to 10P pins.

Core Product Advantages and Features

Multi-pole specification selection

Offers 2P to 10P shared bridging options, allowing for flexible selection based on the number of power distribution circuits.

Tool-free plug-in installation

It adopts a plug-in structure, which can quickly complete the bridging between terminals without tools.

Wide range of cross-connection capabilities

A single bridging connector can bridge up to 50 sets of terminals in two bridging slots.

Corresponding to 10.2mm pin pitch terminals

Designed specifically for the CLIPLINE terminal block series with a pin pitch of 10.2mm, ensuring matching accuracy.

project	Specification
Type	FBS series (10.2mm needle pitch)
Stitch	10.2 mm
Extreme number selection	2P – 10P
Rated current	The maximum is approximately 57 A (depending on the number of poles in the model).
color	red

Recommend

Phoenix Contact PTTB 1.5/S/2P Double Layer Terminal Block

3212439

The PTTB 1,5/S/2P is a double-layer, two-pole (2P) terminal block that uses push-in/plug-out wiring technology. It can accept wires from 0.14 to 1.5 mm², has a rated voltage of 500V and a rated current of 16A, and features a gray body with orange plug-in parts. It is suitable for NS 35 rail mounting and effectively saves wiring space.

Phoenix Contact PT 6 Through-hole Terminal Block

3211813

The PT 6 is a single-layer push-in terminal block that allows for tool-free wire connection. It can accept wires from 0.5 to 10 mm², has a rated voltage of 1000V and a rated current of 41A, a gray body, is suitable for NS 35 rail mounting, and can be used with CLIPLINE series bridging connectors and test accessories.

Phoenix Contact FBS pluggable bridging connector, 3.5mm pin pitch.

Plug-in bridging connector FBS§ Pin pitch: 3.5mm (2P~10P)

FBS pluggable bridging connectors have a pin pitch of 3.5mm and are available in various pole numbers from 2P to 10P. They are suitable for 3.5mm pin pitch small terminal blocks in the CLIPLINE complete system. A single bridging connector can bridge up to 50 terminals and has a rated current of approximately 17.5A. Common potential wiring can be completed without tools.