3RT2026-1AP60

The 3RT2026-1AP60 features a dual-frequency coil design (220V AC 50Hz/240V AC 60Hz), allowing a single part number to accommodate both 50Hz and 60Hz power systems. The AC-3 rated capacity is 25A/11kW, with 1NO+1NC auxiliary contacts, making it suitable for export machines and cross-regional equipment.

Share To

Siemens 3RT2026-1AP60 220-240V AC Dual-Frequency Coil Contactor 25A

Product Positioning

The coil specifications of 3RT2026-1AP60 are marked as dual-frequency compatible with 220V AC 50Hz and 240V AC 60Hz. For equipment manufacturers that sell their machines to both 50Hz and 60Hz power systems, the same part number can cover the two power grid frequencies, eliminating the need to prepare and select parts separately according to the shipping region, effectively simplifying BOM management and reducing inventory costs.

Core Product Advantages and Features

220/240V AC dual-frequency coil

A single part number corresponds to two mains frequencies, 50Hz and 60Hz, simplifying part selection for export models.

AC-3 25A/11kW main circuit

The S0 housing standard rating meets the control requirements of most small and medium power three-phase motors.

1NO+1NC auxiliary contact

Provides basic interlocking and status feedback signal output.

Lightweight S0 chassis design

Weighing approximately 0.415kg, the chassis configuration and heat dissipation space planning offer greater flexibility.

project	Specification
model	3RT2026-1AP60
AC-3 rated current	25 A
AC-3 Rated Power (400V)	11 kW
Extreme number	3P
Coil Specifications	220 V AC 50Hz / 240 V AC 60Hz
auxiliary contacts	1 NO + 1 NC
Main circuit terminals	Screw terminals
net weight	Approximately 0.415 kg
Rated usage category	AC-3 (Motor Start/Stop)
Insulation voltage (pollution level 3)	690 V
Rated impulse withstand voltage	6 kV
Frontal protection level	IP20 (according to IEC 60529)
Mechanical life (typical value)	10 million cycles
Ambient operating temperature	-25°C ~ +60°C
Applicable Standards	IEC 60947-4-1 / IEC 60947-5-1
chassis code	S0
Installation method	35mm DIN rail or panel locking

Recommend

3RT2026-1BB44

Based on the standard 24V DC coil, the 3RT2026-1BB44 upgrades the auxiliary contacts to 4 points (2NO+2NC). The AC-3 rated 25A/11kW/400V remains unchanged, making it suitable for control panel designs that require multiple sets of contacts, such as indicator light feedback and interlocking circuits.

3RT2026-1AP04

The 3RT2026-1AP04 is a 230V AC 50Hz coil contactor with 4 auxiliary contacts (2NO+2NC). It has an AC-3 rated capacity of 25A/11kW/400V and a holding apparent power of 77VA. It is suitable for automated panels that require multiple sets of AC control signal feedback at the same time.

3RT2026-1AP00

The S00 standard frame three-pole contactor features a 230V AC coil, compatible with common European control voltages. It has 1 NO + 1 NC auxiliary contacts for direct connection to a PLC signal circuit, and its 25A/11kW load capacity is sufficient for general motor starting and stopping.