Procurement Zone

A dedicated side panel for Phoenix Contact ST 2,5-QUATTRO four-layer (four-segment) terminal blocks, featuring a gray finish and a height of 72.2mm, securely covering both ends of the four-layer terminal block structure.

A dedicated side panel for Phoenix Contact ST 2,5-TWIN double (two-section) terminal blocks, gray in appearance, 60.5mm high, which can secure both ends of the double terminal block and keep them neatly arranged.

Phoenix Contact UCT-TM 5-terminal marking strips are suitable for 5.2mm pitch terminal blocks. They are standard white (RAL 9010), with 72 labels per sheet. They can be used with BLUEMARK, THERMOMARK and other series printers to print terminal numbers.

Phoenix Contact FBS series pluggable bridging connectors, with a pitch of 5.2mm, are available in various pole numbers from 2 to 50, rated current 24A, and offer quick plug-in installation. They are suitable for parallel connection to CLIPLINE terminal block systems.

Side plates (end covers) for Phoenix Contact ST 2,5 series terminal blocks, made of gray polyamide, are installed at the ends of terminal blocks to provide mechanical fixation and insulation protection, and are an essential accessory for terminal block installation.

Phoenix Contact UCT-TM 6 marking strips are white blank labels suitable for 6.2mm pitch terminal blocks. The label size is approximately 5.2×9.9mm. They can be printed with numbers using a printer, facilitating the identification and management of wiring circuits.

Phoenix Contact UTTB 2,5 is a double-screw-type terminal block with a rated current of 24A and a rated voltage of 800V. It can accommodate wires with a cross-sectional area of 0.14 to 4 square millimeters. A single terminal block can provide independent circuit connections for both upper and lower layers, saving installation space.

The Phoenix Contact UT 4-QUATTRO is a four-way screw-lock terminal block that can handle wire cross-sectional areas from 0.14 to 6 square millimeters. A single terminal block can connect four wires, making it suitable for control panel applications that require multi-circuit branching.

Phoenix Contact fuse terminal block (model UT 4-HESILED 24, 5x20) features a built-in 5x20mm fuse holder and 24V indicator light, and can accommodate wire cross-sectional areas from 0.14 to 6 square millimeters. It is suitable for applications requiring circuit overcurrent protection and circuit break indication.

Phoenix Contact UT 4-PE is a yellow-green dedicated grounding terminal block that can accommodate wires with a cross-sectional area of 0.14 to 6 square millimeters. Grounding is achieved through direct contact with the DIN rail, eliminating the need for additional grounding wires. Installation is quick and less prone to wiring errors.

Phoenix Contact UT 6 is a screw-lock terminal block with a rated current of 57A and a rated voltage of 800V. It can accommodate wires with cross-sectional areas from 0.2 to 10 square millimeters, with a nominal cross-sectional area of 6 square millimeters. It is suitable for power circuit wiring applications with high current requirements.

Phoenix Contact UT 2,5 is a screw-lock terminal block with a rated current of 32A and a rated voltage of 800V. It can accommodate wires with a cross-sectional area of 0.14 to 4 square millimeters, with a nominal cross-sectional area of 2.5 square millimeters. It is a common type of through-type terminal block used in control panels.

Phoenix Contact UT 4 is a screw-lock terminal block with a rated current of 41A and a rated voltage of 800V. It can accommodate wires with a cross-sectional area of 0.14 to 6 square millimeters, with a nominal cross-sectional area of 4 square millimeters. It is a commonly used through-type terminal block in control panels and distribution boxes.

Phoenix Contact PT 1,5/S-QUATTRO direct-plug terminal block allows for the simultaneous connection of four wires to a single terminal block. It features a rated voltage of 500V and a rated current of 17.5A, and adopts a spring-loaded crimp design, making it suitable for centralized wiring of multiple circuits in distribution panels and saving installation space.

Phoenix Contact PT 10 direct-insertion terminal blocks are rated for up to 1000V and 57A, and can carry wires from 0.5 to 16mm². They are suitable for high-current circuits such as motors and power distribution systems. The spring-loaded crimp design ensures fast and reliable wiring.