Procurement Zone

Phoenix Contact PTTBS 2.5 double-layer terminal blocks integrate two independent circuits within a single terminal block using a stacked design. Rated voltage 500V and rated current 22A, they are suitable for distribution box applications with a large number of circuits and limited panel space.

Phoenix Contact PT 1,5/S-TWIN is a TWIN series double-layer terminal block. A single terminal block can connect two circuits. It has a rated voltage of 500V and a rated current of 17.5A, and supports wires from 0.14 to 1.5mm². It is suitable for signal and low-current circuit tapping applications.

Phoenix Contact PT 4-TWIN is a double-layer terminal block from the TWIN series. It can split a single input into two independent circuits. It has a rated voltage of 800V and a rated current of 32A, and supports wires from 0.2 to 6mm². It is suitable for the branching and wiring needs of medium and high current circuits.

Phoenix Contact PT 4-HESILA 250 (5x20) fuse terminal block allows direct installation of 5x20mm fuses for circuit overcurrent protection. It has a rated voltage of 250V and a rated current of 6.3A, and features an optical indicator for fuse failure, facilitating quick troubleshooting by maintenance personnel.

Phoenix Contact PT 2,5-QUATTRO-PE is a yellow-green protective grounding terminal with a single terminal block providing four connection points. It supports wires from 0.14 to 4 mm² and achieves fast and reliable grounding through direct contact with DIN rails, conforming to IEC 60947-7-2 protective conductor terminal specifications.

Phoenix Contact PT 1,5/S is a basic terminal block in the CLIPLINE series, providing two connection points, rated voltage 500V, rated current 17.5A, and supporting wires from 0.14 to 1.5mm², suitable for standard wiring needs of control signals and low-current circuits.

Phoenix Contact PT 4-QUATTRO direct-plug terminal block allows for the simultaneous connection of four independent wires to a single terminal block. It is rated at 800V and 32A, and supports wires from 0.2 to 6mm². It is suitable for multi-circuit centralized wiring of power circuits or large cross-sectional area wires.

The original German-made Phoenix Contact PT 4-HESILED 24 fuse terminal block features push-in tool-free wiring, a built-in 24V LED fuse breakage indicator, and can accommodate 5x20mm fuse tubes. It is suitable for distribution panel circuit protection and rapid fault troubleshooting.

The German-made Phoenix Contact PT 2,5-PE grounding terminal features a yellow-green dual-color appearance that conforms to protective grounding identification standards. It completes the grounding circuit directly through the DIN rail, eliminating the need for additional grounding wire wiring. Installation is quick and maintenance is tool-free.

The German-made Phoenix Contact PT 4 terminal block features push-in tool-free wiring technology, a rated current of up to 32A, and a conductor cross-sectional area range of 0.2-6 square millimeters. It is suitable for single-layer straight-through wiring applications in industrial distribution panels that require larger wire diameters.

The original German-made Phoenix Contact PT 2.5-3L multi-layer terminal block features a three-dimensional stacked structure with first to third layers. It can integrate three independent circuits with a single-point installation and features push-in wiring, making it suitable for distribution box applications with limited space but a large number of circuits.

The original German Phoenix Contact PTTB 2.5 double-layer stacked terminal block features push-in tool-free wiring for both the first and second layers. A single base can accommodate two independent circuits, effectively reducing the DIN rail mounting length in the distribution panel.

The German-made Phoenix Contact PT 2,5-QUATTRO plug-in terminal block features a single base providing four connection points. It uses a push-in tool-free wiring method and is suitable for power distribution applications that require connecting a single circuit to multiple conductors simultaneously.

The German-made Phoenix Contact UK 5 N screw-type terminal block uses traditional screw-locking wiring, has a rated current of up to 32A, and features a universal base design that can be installed on various DIN rails such as NS 35 and NS 32, making it suitable for wiring in various distribution panels.

The German-made Phoenix Contact PT 2,5-TWIN terminal block features a single base that integrates three connection positions, facilitating the splitting of a single circuit into two outputs. Its push-in wiring design is suitable for signal or power branching applications.