Terminal Blocks

The PTI 2,5-L/TG is a terminal block for building power distribution installation. It adopts push-in wiring technology and can connect wires from 0.14 to 4 mm². It has a rated voltage of 400V and a rated current of 24A. The upper layer has a knife-type isolation zone to meet the individual isolation testing requirements of the circuit. It can be installed on NS 35 rails.

The PTFIX 6/6X2,5-NS35A GY is a horizontally configured power distribution terminal block. It can accept 0.14 to 4 mm² wires on the load side and 0.5 to 10 mm² wires on the feeder side. Both use push-in wiring. The rated voltage is 690V. It has 7 contacts and is gray (RAL 7042). It is suitable for NS 35 rail mounting.

PTI 2,5-PE/L/L is designed for protective earthing (PE) circuits in building distribution boxes. It uses push-in wiring technology and can accept conductors from 0.14 to 4 mm². It has a rated voltage of 400V, a three-layer connection structure with a total of 5 contacts, a gray appearance, and is suitable for NS 35 rail mounting. It is used in conjunction with other terminals in the same series.

The PTTB 1,5/S/2P is a double-layer, two-pole (2P) terminal block that uses push-in/plug-out wiring technology. It can accept wires from 0.14 to 1.5 mm², has a rated voltage of 500V and a rated current of 16A, and features a gray body with orange plug-in parts. It is suitable for NS 35 rail mounting and effectively saves wiring space.

FBS pluggable bridging connectors have a pin pitch of 10.2mm and are available in various pole sizes from 2P to 10P. They are suitable for 10.2mm pin pitch terminal blocks in a complete CLIPLINE system. A single bridging connector can bridge up to 50 terminals and has a rated current of up to 57A. Tool-free plugging and unplugging installation facilitates multi-circuit shared potential wiring.

The PT 6 is a single-layer push-in terminal block that allows for tool-free wire connection. It can accept wires from 0.5 to 10 mm², has a rated voltage of 1000V and a rated current of 41A, a gray body, is suitable for NS 35 rail mounting, and can be used with CLIPLINE series bridging connectors and test accessories.

FBS pluggable bridging connectors have a pin pitch of 3.5mm and are available in various pole numbers from 2P to 10P. They are suitable for 3.5mm pin pitch small terminal blocks in the CLIPLINE complete system. A single bridging connector can bridge up to 50 terminals and has a rated current of approximately 17.5A. Common potential wiring can be completed without tools.

The FBS pluggable bridging connector has a pin pitch of 6.2mm and is available in various pole numbers from 2P to 10P. It is suitable for 6.2mm pin pitch terminal blocks in the CLIPLINE complete system. A single bridging connector can bridge up to 50 terminals and has a rated current of approximately 32A. Common potential wiring can be completed without tools.

This is a dedicated side plate (end plate) for Phoenix Contact UT 2,5 series DIN rail terminal blocks. It has a gray appearance and is only 2.2mm thick. It can effectively fix a row of terminals and maintain their stable arrangement. It is an indispensable basic accessory for terminal block installation.

Phoenix Contact PT 2,5/1P is a single-layer push-in straight-through terminal block with a rated voltage of 500V and a rated current of 24A. It is suitable for wires from 0.14 to 4mm², allows for tool-free quick wiring, and can be installed on NS 35 DIN rails.

A dedicated side panel for Phoenix Contact PTTB 2.5 double (two-section) terminal blocks, gray in appearance, 68mm high and 2.2mm thick, which can secure both ends of the double terminal block and provide necessary insulation support.

A dedicated side plate (end plate) for Phoenix Contact UK 4 screw terminal blocks, gray in appearance, only 1.8mm thick, to secure both ends of the terminal block and prevent the terminals from loosening or shifting on the DIN rail.